FL16963

Parent Folder

Save to Favorites

Most Recent Revision

FL16963-R0

Revision Folder

Manufacturer

Report Status

Approved

Code

2017 Florida Building Code

Validator

Ted Berman, PE

Approvals in this folder:

PR Instl Docs FL16963 R0 II 3052487

24 ga. [0.0276 in. (0.7 mm)] formed galvanized steel or 0.040 in. (1.0 mm) formed aluminum. Fascia height: Fascia height: 4.5 in (114 mm) (Model EDE-45), 6 in. (152 mm) (Model EDE-60).

Anchor-Tite Drip Edge

PR Instl Docs FL16963 R0 II FM Listing

22 or 24 ga. [0.336 or 0.0276 in.] formed galvanized steel or 24 ga. [0.0276 in.] formed galvanized steel with PVC coating or TPO coating or 0.040, 0.050 or 0.063 in. formed aluminum or 0.040 formed aluminum with PVC coating or TPO coating.

PR Instl Docs FL16963 R0 II 3052487

24 ga. [0.0276 in. (0.7 mm)] formed galvanized steel or 0.040 in. (1.0 mm) formed aluminum. Fascia height: 5 in (127 mm) (Model ESE-M50), 6.5 in (165 mm) (Model ESE-M65), 8 in. (203 mm) (Model ESE-M80).

One Edge (Modified)

PR Instl Docs FL16963 R0 II 3052487

24 ga. [0.0276 in.] formed galvanized steel or 0.040in. formed aluminum. Fascia height: 4 in (Model ESE-S40), 5 in (Model ESE-S50), 6.5 in (Model ESE-S65) or 8 in (Model ESE-S80).

One Edge (Single Ply)

PR Instl Docs FL16963 R0 II 3052487

0.050 or 0.063 in. formed aluminum. Fascia height: ^8-12.5 in. Cleat: 20 ga. [0.0396 in. galvanized steel continuous cleat and 6 in wide stainless steel spring clips.

One Edge Extended Fascia

PR Instl Docs FL16963 R0 II 3052487

24 ga. [0.0276 in. (0.7 mm)] formed galvanized steel or minimum 0.040 in. (1.01 mm) formed aluminum. Fascia height: 6 in (152 mm) front face, 4 in (102) top flange. Cleat: 22 ga. [0.0336 in (0.853 mm)] galvanized steel continuous cleat.

One Flash-Through Drip Edge

PR Instl Docs FL16963 R0 II 3052487

24 ga. formed galvanized steel or 24 ga. formed galvanized steel with PVC coating or TPO coating or 0.040, 0.050 or 0.063 in. formed aluminum or 0.040 in. formed aluminum with PVC coating or TPO coating.

One Gravel Stop

PR Instl Docs FL16963 R0 II 3052487

24 ga. formed galvanized steel or 0.040 in., 0.050 in., 0.063 in. formed aluminum. Fascia height: 5 in., 6.5 in., or 8 in., 9.5 in.* , 11 in. *, 12.5 in.*. * Minimum 0.050 in Al covers for these larger products

Perma-Tite 200 Fascia, Single Ply, Crimp-On

PR Instl Docs FL16963 R0 II 3052487

Coping cover material: 24 ga. formed galvanized steel or 0.040in., 0.050 in., 0.063 in. formed aluminum.

Perma-Tite Continuous Cleat Coping (Tapered, Flat and Existing Slope Versions).

PR Instl Docs FL16963 R0 II 3052487

24 ga. formed galvanized steel or 0.040, 0.050 in., 0.063 in. formed aluminum. Outside face height: 3-12 in, Wall widths: 3.5-32 in, Inside face height: 2.25-4 in. Anchor Clips: 12 in wide either 20 ga. or 16 ga. galvanized steel.

Perma-Tite Coping (Tapered, Flat and Existing Slope Versions)

PR Instl Docs FL16963 R0 II 3052487

24 ga. formed galvanized steel or 0.040, 0.050 in., 0.063 formed aluminum. Outside face height: 3-12 in, Wall widths: 3.5-32 in, Inside face height: 2.5-4 in. Anchor Clips: 12 in wide either 20 ga. or 16 ga. galvanized steel.

Perma-Tite Flush Face Coping (Tapered, Flat and Existing Slope Versions)

PR Instl Docs FL16963 R0 II 3052487

0.050 or 0.063 in. (1.27 or 1.60 mm) thick formed aluminum. Fascia height: 5.5 in (140 mm) (Model AEFC-552), 9 in. (229 mm) (Model AEFC-902), 10.5 in. (267 mm) (Model AEFC-1052), 12 in. (305 mm) (Model AEFC-1202) or 13.5 in. (343 mm) (Model AEFC-1352).

Anchor-Tite Extended Canted Fascia

PR Instl Docs FL16963 R0 II 3052487

24 ga. [0.0276 in. (0.70 mm)] formed galvanized steel or 0.040 (1.0 mm), 0.050 in. (1.3 mm), 0.063 in. (1.6 mm) formed aluminum. Outside face height: 3-12 in, Wall widths: 3.5-32 in, Inside face height: 2.5-4 in.

Perma-Tite Gold Coping (Tapered, Flat and Existing Slope Versions)

PR Instl Docs FL16963 R0 II 3052487

24 ga. formed galvanized steel or 0.040, 0.050 in., 0.063 in. formed aluminum. Fascia height: 5.25 in, 6.75 in., 8.25 in., 9.75 in., 11.25 in., 12.75 in. Cant (Water Dam) material: 24 ga. formed galvanized steel and 6 in wide stainless steel spring clips.

Perma-Tite System 200 Fascia, Single Ply, Snap-On

PR Instl Docs FL16963 R0 II 3052487

Same as Perma-Tite System 200 Fascia, Single Ply Snap-On but it is used with modified bitumen roof membranes.

Perma-Tite System 300 Fascia, Modified, Snap-On

PR Instl Docs FL16963 R0 II 3052487

24 ga. formed galvanized steel or 0.040, 0.050 in., 0.063 in. formed aluminum. Outside face height: 3-12 in, Wall widths: 6-32 in., Inside face height: 1.25-4 in.

Single Cantilever Coping (Tapered, Flat and Existing Slope Versions)

PR Instl Docs FL16963 R0 II 3052487

Coping cover material: 24 ga. formed galv. steel or 0.040, 0.050 in., 0.063 in formed alum. Outside face height: 6 in, Wall width: 16 in, Inside face height: 1.25-4 in or outside face height: 10 in, Wall width: 7.5-24 in, Inside face height: 2.5-4 in.

Single Cantilever Coping (Tapered, Flat and Existing Slope)

PR Instl Docs FL16963 R0 II 3052487

0.040 in. (1.02 mm) aluminum or 24 ga. [0.0276 in. (0.7 mm)] galvanized steel. Fascia height: 4 in. (102 mm) (Model VT-40), 5.5 in. (140 mm) (Model VT-55), 7 in. (178 mm) (Model VT-70). Rail: 0.050 in. (1.27 mm) thick aluminum.

VersiTrim Fascia System (Standard Version)

PR Instl Docs FL16963 R0 II 3052487

0.050 or 0.063 in. (1.27 or 1.60 mm) thick formed aluminum. Fascia height: 8.5 in. (216 mm) (Model AEFM-85), 10 in. (254 mm) (Model AEFM-100), 11.5 in. (292 mm) (Model AEFM-115) or 13 in. (330 mm) (Model AEFM-130).

Anchor-Tite Extended Fascia-B.U.R./Modified Version

PR Instl Docs FL16963 R0 II 3052487

0.050 or 0.063 in. (1.27 or 1.60 mm) thick formed aluminum. Fascia height: 8.5 in. (216 mm) (Model AEF-85), 10 in. (254 mm) (Model AEF-100), 11.5 in. (292 mm) (Model AEF-115) or 13 in. (330 mm) (Model AEF-130).

Anchor-Tite Extended Fascia-Single Ply Version

PR Instl Docs FL16963 R0 II 3052487

0.050 or 0.063 in. (1.27 or 1.60 mm) thick formed aluminum. Fascia height: Fascia height: 5.5 in (140 mm) (Model HG-AFM-55), 7 in. (178 mm) (Model HG-AFM-70).

Anchor-Tite HG Fascia-B.U.R./Modified Version

PR Instl Docs FL16963 R0 II 3052487

0.050 or 0.063 in. (1.27 or 1.60 mm) thick formed aluminum. Fascia height: Fascia height: 4 in (102 mm) (Model HG-AF-40), 5.5 in (140 mm) (Model HG-AF-55), 7 in. (178 mm) (Model HG-AF-70).

Anchor-Tite HG Fascia-Single Ply Version

PR Instl Docs FL16963 R0 II 3052487

24 ga. [0.0276 in. (0.7 mm)] formed galvanized steel or 0.040 in. (1.0 mm) formed aluminum. Fascia height: Fascia height: 5-5.5 in. (127-140 mm) (Model AFM-50), 6.5-7.0 in. (165-178 mm) (Model AFM-70) or 8.5 in. (216 mm) (Model AFM-85).

Anchor-Tite Standard Fascia-B.U.R./Modified Version.

PR Instl Docs FL16963 R0 II 3052487

24 ga. [0.0276 in. (0.7 mm)] formed galvanized steel or 0.040 in. (1.0 mm) formed aluminum. Fascia height: 4 in. (102 mm) (Model AF-40), 5.5 in. (140 mm) (Model AF-55), 7 in. (178 mm) (Model AF-70) or 8.5 in. (216 mm) (Model AF-85).

Anchor-Tite Standard Fascia-Single Ply Version

PR Instl Docs FL16963 R0 II 3052487

Coping cover material: 0.050 in., 0.063 in. formed aluminum. Outside face height: 3-6 in, Wall width: 5.5-32 in, Inside face height: 1.25-4 in. Continuous Cleats: Two continuous minimum 5.5 in wide, 16 ga. [0.0635 in. ] galvanized steel cleats.

ES-One Coping (Tapered, Flat and Existing Slope Versions)

Manufacturer Info

Metal-Era, LLC is a leading engineering and manufacturing company specializing in innovative metal fabrication solutions. With a commitment to excellence and customer satisfaction, they provide comprehensive services, including custom metal fabrication, laser cutting, CNC machining, welding, and assembly, catering to a diverse range of industries, from automotive and aerospace to energy and construction. View all listings

* This manufacturer has not claimed their profile. Any logo or description displayed above has been generated by AI.

Folder QR Code

FL16963 Listing QR Code

2234 North Federal Hwy #7664
Boca Raton, FL 33431

Privacy & Accessibility — Terms of Use

EngineeringPlans.com provides an independent way to search Florida, Miami Dade Product Approvals, & product evaluations from other listed agencies & is not affiliated with the State of Florida, Miami-Dade County, FloridaBuilding.org, miamidade.gov, Intertek, CALADBS, Dr. J’s Engineering, or any other listed agency in any way. Information provided from this website is obtained from public records and must be verified by the source agency prior to use. EngineeringPlans.com is not responsible for the accuracy or use of any information contained herein.

Information, methodology, logos, photos, & trademarked names on this website may not be used, reproduced, distributed, or modified without the written permission of EngineeringPlans.com or they’re corresponding owners. Any information provided by this site is not binding and shall not be used or taken as fact without the written certification of a licensed Design Professional.

EngineeringPlans.com may contain affiliate links in posts & pages & may receive a small fee from purchases made. There is no cost to you for this service. Reviews & opinions are not affected by this.

EngineeringPlans.com is not an architectural/engineering firm but partners with design professionals to provide compliant content as applicable. Each firm is responsible for their respective contributions.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

2025

© EngineeringPlans.com All rights reserved.