Search from thousands of Florida, Miami-Dade & other Engineering Plans. Search all at once, save, share, & monitor listings, all for free. Sign Up - Look inside Approval content with our DeepSearch reports - Learn More
0.9" x 10.25" x20'; 0.9" x10.25" x 50' rolled ridge vent, plastic
Listing Details
Category:
Roofing
Subcategory:
Roofing Accessories that are an Integral Part of the Roofing System
Evaluator:
Zachary R. Priest - PE-74021
Validator:
Locke Bowden P.E.
Official Site Status:
Approved
Compliance Method:
Evaluation Report from a Florida Registered Architect or a Licensed Florida Professional Engineer
Approval Method:
Method 1 Option D
Entity:
Specifications
Submission Date:
January 26, 2018
Validation Date:
January 26, 2018
Expiration Date:
12/31/2021
HVHZ Approved:
No
Impact Resistant:
[ None ]
Design Pressures:
-160psf / +0psf
Possible CSI Codes:
CSI Code: 07 72 00 - Roof Accessories
CSI Code: 07 63 00 - Sheet Metal Roofing Specialties
CSI Code: 07 71 00 - Roof Specialties
CSI Code: 07 70 00 - Roof and Wall Specialties and Accessories
CSI Code: 07 01 70 - Operation and Maintenance of Roof Specialties and Accessories
Other:
Refer to applicable building code for required ventilation, Roll Vent shall not be installed in conjunction with Gable Vents, Roll Vent shall not be installed on hip roofs, Roll Vent shall not be connected at ridge intersection, nor within 12" of any side wall or roof protrusion with a ventilation slot clearance of 12" from such obstructions, Roll Vent shall not be installed on roof mean heights greater than 33ft.
Notes:
Date Submitted: January 26, 2018
Date Validated: January 26, 2018
Entity:
Compliance Method: Evaluation Report from a Florida Registered Architect or a Licensed Florida Professional Engineer
Other: Refer to applicable building code for required ventilation, Roll Vent shall not be installed in conjunction with Gable Vents, Roll Vent shall not be installed on hip roofs, Roll Vent shall not be connected at ridge intersection, nor within 12" of any side wall or roof protrusion with a ventilation slot clearance of 12" from such obstructions, Roll Vent shall not be installed on roof mean heights greater than 33ft.
Official Site Status: Approved
Subcategory: Roofing Accessories that are an Integral Part of the Roofing System
Contact Information
Representative:
George Caruso
Address:
400 Babylon Road Suite A, Horsham, Pennsylvania 19044 USA